<control lang="en" key="IDT_EXTRACT_DESTINATION">Please select or type the location where you want to place the extracted files:</control>
<control lang="en" key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the TrueCrypt program files. If the specified folder does not exist, it will be automatically created.</control>
<control lang="en" key="IDT_UNINSTALL_DIR">Click Uninstall to remove TrueCrypt from this system.</control>
<control lang="en" key="IDT_COLLECTING_RANDOM_DATA_NOTE">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Next to continue.</control>
<control lang="en" key="IDT_MULTI_BOOT">Select this option if there are two or more operating systems installed on this computer.\n\nFor example:\n- Windows XP and Windows XP\n- Windows XP and Windows Vista\n- Windows and Mac OS X\n- Windows and Linux\n- Windows, Linux and Mac OS X</control>
<control lang="en" key="IDT_NON_SYS_DEVICE">Formats and encrypts a non-system partition, entire external or secondary drive, entire USB stick, etc.</control>
<control lang="en" key="IDT_PARTIAL_POOL_CONTENTS">Current pool content (partial)</control>
<control lang="en" key="IDT_SINGLE_BOOT">Select this option if there is only one operating system installed on this computer (even if it has multiple users).</control>
<control lang="en" key="IDT_SYSENC_KEYS_GEN_INFO">The keys, salt, and other data have been successfully generated. If you want to generate new keys, click Back and then Next. Otherwise, click Next to continue.</control>
<control lang="en" key="IDT_SYS_DEVICE">Encrypts the partition/drive where Windows is installed. Anyone who wants to gain access and use the system, read and write files, etc., will need to enter the correct password each time before Windows boots. Optionally, creates a hidden system.</control>
<control lang="en" key="IDT_SYS_PARTITION">Select this option to encrypt the partition where your Windows is installed and from which it boots.</control>
<control lang="en" key="IDD_MOUNT_OPTIONS">TrueCrypt - Mount Options</control>
<control lang="en" key="IDD_RAWDEVICES_DLG">Select a Partition or Device</control>
<control lang="en" key="IDT_ACTIVE_LANG_PACK">Active language pack</control>
<control lang="en" key="IDT_BOX_BENCHMARK_INFO">Speed is affected by CPU load and storage device characteristics.\n\nThese tests take place in RAM.</control>
<control lang="en" key="IDT_KEYFILE_GENERATOR_NOTE">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the keyfile.</control>
<control lang="en" key="IDT_KEYFILE_WARNING">WARNING: If you lose a keyfile or if any bit of its first 1024 kilobytes changes, it will be impossible to mount volumes that use the keyfile!</control>
<control lang="en" key="IDT_KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a TrueCrypt keyfile. Note that TrueCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all files found in it will be used as keyfiles.</control>
<control lang="en" key="IDT_TEST_CONFIG">Cipher Configuration (all sizes in bytes)</control>
<string lang="en" key="ACCESSMODEFAIL">The read-only attribute on your old volume could not be changed. Please check the file access permissions.</string>
<string lang="en" key="ACCESS_DENIED">Error: Access denied.\n\nThe partition you are trying to access is either 0 sectors long, or it is the boot device.</string>
<string lang="en" key="ADMIN_PRIVILEGES_DRIVER">In order to load the TrueCrypt driver, you need to be logged into an account with administrator privileges.</string>
<string lang="en" key="ADMIN_PRIVILEGES_WARN_DEVICES">Please note that in order to encrypt/format a partition/device you need to be logged into an account with administrator privileges.\n\nThis does not apply to file-hosted volumes.</string>
<string lang="en" key="ADMIN_PRIVILEGES_WARN_HIDVOL">In order to create a hidden volume you need to be logged into an account with administrator privileges.\n\nContinue?</string>
<string lang="en" key="ADMIN_PRIVILEGES_WARN_NTFS">Please note that in order to format the volume as NTFS you need to be logged into an account with administrator privileges.\n\nWithout administrator privileges, you can format the volume as FAT.</string>
<string lang="en" key="AES_HELP">FIPS-approved cipher (Rijndael, published in 1998) that may be used by U.S. government departments and agencies to protect classified information up to the Top Secret level. 256-bit key, 128-bit block, 14 rounds (AES-256). Mode of operation is XTS.</string>
<string lang="en" key="ALREADY_MOUNTED">Volume is already mounted.</string>
<string lang="en" key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nTrueCrypt installation may be corrupted.</string>
<string lang="en" key="ERR_NOT_ENOUGH_RANDOM_DATA">CAUTION: There is not enough data in the Random Number Generator pool to provide the requested amount of random data.\n\nYou should not proceed any further. Please select 'Report a Bug' from the Help menu, and report this error.</string>
<string lang="en" key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with TrueCrypt. Therefore, please do NOT report this as a bug/problem in TrueCrypt and please do NOT ask for help with this in the TrueCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</string>
<string lang="en" key="HIDDEN_VOLUME_TYPE_HELP">It may happen that you are forced by somebody to reveal the password to an encrypted volume. There are many situations where you cannot refuse to reveal the password (for example, due to extortion). Using a so-called hidden volume allows you to solve such situations without revealing the password to your volume.</string>
<string lang="en" key="NORMAL_VOLUME_TYPE_HELP">Select this option if you want to create a normal TrueCrypt volume.</string>
<string lang="en" key="HIDDEN_OS_PRECLUDES_SINGLE_KEY_WDE">Please note that if you wish an operating system to be installed in a hidden partition-hosted volume, then the entire system drive cannot be encrypted using a single key.</string>
<string lang="en" key="CLEAN_WINMRU_FAILED">WARNING: Failed to clear the path of the last selected volume/keyfile (remembered by file selector)!</string>
<string lang="en" key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. TrueCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in TrueCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</string>
<string lang="en" key="CREATE_FAILED">Failed to create volume %hs</string>
<string lang="en" key="DEVICE_FREE_BYTES">Size of %hs is %.2f bytes</string>
<string lang="en" key="DEVICE_FREE_GB">Size of %hs is %d GB</string>
<string lang="en" key="DEVICE_FREE_KB">Size of %hs is %.2f KB</string>
<string lang="en" key="DEVICE_FREE_MB">Size of %hs is %.2f MB</string>
<string lang="en" key="DEVICE_FREE_PB">Size of %hs is %d PB</string>
<string lang="en" key="DEVICE_FREE_TB">Size of %hs is %d TB</string>
<string lang="en" key="DEVICE_IN_USE">WARNING: Device/partition is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the device/partition should be closed before mounting the volume.\n\nContinue with mounting?</string>
<string lang="en" key="DEVICE_IN_USE_FORMAT">WARNING: The device/partition is in use by the operating system or applications. Formatting the device/partition might cause data corruption and system instability.\n\nContinue?</string>
<string lang="en" key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'New Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in TrueCrypt may be wrong now. Therefore, exit the TrueCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf TrueCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string>
<string lang="en" key="DEVICE_IN_USE_INFO">WARNING: Some of the mounted devices/partitions were already in use!\n\nIgnoring this can cause undesired results including system instability.\n\nWe strongly recommend that you close any application that might be using the devices/partitions.</string>
<string lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable TrueCrypt to format it safely.</string>
<string lang="en" key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this partition/device can NOT be mounted using the drive letter %c:, which is currently assigned to it!\n\nTo mount this partition/device, click 'Auto-Mount Devices' in the main TrueCrypt window. Alternatively, in the main TrueCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'. The partition/device will be mounted to a different drive letter, which you will select from the list in the main TrueCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it and assign it to another partition/device).</string>
<string lang="en" key="DISK_FREE_BYTES">Free space on drive %hs is %.2f bytes.</string>
<string lang="en" key="DISK_FREE_GB">Free space on drive %hs is %d GB.</string>
<string lang="en" key="DISK_FREE_KB">Free space on drive %hs is %.2f KB.</string>
<string lang="en" key="DISK_FREE_MB">Free space on drive %hs is %.2f MB.</string>
<string lang="en" key="DISK_FREE_PB">Free space on drive %hs is %d PB.</string>
<string lang="en" key="DISK_FREE_TB">Free space on drive %hs is %d TB.</string>
<string lang="en" key="DRIVELETTERS">Could not get available drive letters.</string>
<string lang="en" key="DRIVER_NOT_FOUND">Error: TrueCrypt driver not found.\n\nPlease copy the files 'truecrypt.sys' and 'truecrypt-x64.sys' to the directory where the main TrueCrypt application (TrueCrypt.exe) is located.</string>
<string lang="en" key="DRIVER_VERSION">An incompatible version of the TrueCrypt device driver is currently running.\n\nRequired version: TrueCrypt %hs</string>
<string lang="en" key="ERR_CIPHER_INIT_WEAK_KEY">Error: A weak or a potentially weak key has been detected. The key will be discarded. Please try again.</string>
<string lang="en" key="EXCEPTION_REPORT">A critical error has occured and TrueCrypt must be terminated. If this is caused by a bug in TrueCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- TrueCrypt component name\n- Checksum of TrueCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- Type of CPU\n- TrueCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser (note that in some cases this may take up to 30 seconds).\n\n%hs\n\nDo you want to send us the above error report?</string>
<string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occured in your system, which requires TrueCrypt to be terminated.\n\nNote that this error has not been caused by TrueCrypt (so the TrueCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string>
<string lang="en" key="EXT_PARTITION">Please create a logical drive for this extended partition, and then try again.</string>
<string lang="en" key="FILE_HELP">A TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container is just like any normal file (it can be, for example, moved, copied and deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, TrueCrypt will NOT encrypt it; the file be deleted and replaced with the newly created TrueCrypt container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container that you are about to create now.</string>
<string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container can be moved, copied and deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, TrueCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container you are about to create now.</string>
<string lang="en" key="DEVICE_HELP">\nA device-hosted TrueCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost (you can prevent this only if you select the partition/drive where Windows is installed and from which it boots).</string>
<string lang="en" key="DEVICE_HELP_HIDDEN_HOST_VOL">\nSelect the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA device-hosted TrueCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost (you can prevent this only if you select the partition/drive where Windows is installed and from which it boots).</string>
<string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nSelect the location of the TrueCrypt volume within which you wish to create a hidden volume.</string>
<string lang="en" key="FILE_IN_USE">WARNING: The host file/device is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device should be closed before mounting the volume.\n\nContinue with mounting?</string>
<string lang="en" key="FILE_IN_USE_FAILED">Error: Cannot mount volume. The host file/device is already in use. Attempt to mount without exclusive access failed as well.</string>
<string lang="en" key="FILE_OPEN_FAILED">The file could not be opened.</string>
<string lang="en" key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this TrueCrypt volume?</string>
<string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, TrueCrypt will choose a suitable default file system for the TrueCrypt volume (you will be able to select a file system in the next step).</string>
<string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL">As you are creating an outer volume, you should consider choosing 'No'. If you choose 'Yes', the default filesystem will be NTFS, which is not as suitable for outer volumes as FAT (for example, the maximum possible size of the hidden volume will be significantly greater if the outer volume is formatted as FAT). Normally, FAT is the default for both hidden and normal volumes (so FAT volumes are not suspicious). However, if the user indicates intent to store files larger than 4 GB (which the FAT file system does not allow), then FAT is not the default.</string>
<string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL_CONFIRM">Are you sure you want to choose 'Yes'?</string>
<string lang="en" key="SHOW_MORE_INFORMATION">Show more information</string>
<string lang="en" key="DO_NOT_SHOW_THIS_AGAIN">Do not show this again</string>
<string lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.</string>
<string lang="en" key="SYSTEM_DECRYPTION_FINISHED">The system partition/drive has been successfully decrypted.</string>
<string lang="en" key="FORMAT_FINISHED_HELP">\n\nThe TrueCrypt volume has been created and is ready for use. If you wish to create another TrueCrypt volume, click Next. Otherwise, click Exit.</string>
<string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">The hidden TrueCrypt volume has been successfully created.\n\nIn the next steps, you will set up pre-boot authentication and prepare encryption of the system partition (i.e. of the currently running operating system, which will become the decoy operating system).\n\nAfterwards, TrueCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nFinally, TrueCrypt will encrypt the currently running operating system, which will become the decoy operating system.</string>
<string lang="en" key="FORMAT_FINISHED_INFO">The TrueCrypt volume has been successfully created.</string>
<string lang="en" key="FORMAT_HELP">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Format to create the volume.</string>
<string lang="en" key="FORMAT_HIDVOL_HOST_HELP">Click Format to create the outer volume. For more information, please refer to the documentation.</string>
<string lang="en" key="GETFILETIME_FAILED">WARNING: Could not get container timestamp!</string>
<string lang="en" key="GETFILETIME_FAILED_GENERIC">WARNING: Could not get container timestamp!\n\nIf there is a hidden volume within this container, the plausible deniability of the hidden volume might be affected.</string>
<string lang="en" key="GETFILETIME_FAILED_IMPLANT">WARNING: Could not get container timestamp!\n\nIf you do not reset the timestamp using an external tool, we recommend that you do not create a hidden volume within this container.</string>
<string lang="en" key="GETFILETIME_FAILED_PW">WARNING: Could not get container timestamp!\n\nIf there is a hidden volume within this container, the plausible deniability of the hidden volume might be affected after changing or attempting to change the password.</string>
<string lang="en" key="GETFILETIME_FAILED_KEYFILE">WARNING: Could not get keyfile timestamp! Cannot preserve last access date/time.\n\nIt will be possible to tell that this file has been accessed.</string>
<string lang="en" key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the TrueCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</string>
<string lang="en" key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">If you select this option, the wizard will first help you create a normal TrueCrypt volume and then a hidden TrueCrypt volume within it. Inexperienced users should always select this option.</string>
<string lang="en" key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">If you select this option, you will create a hidden volume within an existing TrueCrypt volume. It will be assumed that you have already created a TrueCrypt volume that is suitable to host the hidden volume.</string>
<string lang="en" key="HIDVOL_FORMAT_FINISHED_HELP">The hidden TrueCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if precautions mentioned in the section "Security Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it will be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE TRUECRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</string>
<string lang="en" key="HIDDEN_OS_CREATION_PROCESS_FINISHED_WARN">All steps necessary to create the hidden operating system have been completed and both operating systems and the outer volume are ready for use.\n\nIf all the instructions have been followed and if precautions mentioned in the section "Security Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it will be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the TrueCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</string>
<string lang="en" key="HIDDEN_OS_CREATION_PROCESS_FINISHED_INFO">Now you can use three passwords:\n\n1) Pre-boot authentication password for the hidden operating system.\n\n2) Pre-boot authentication password for the decoy operating system.\n\n3) Password for the outer volume.\n\n\nIf you want to start the hidden operating system, just enter the password for the hidden operating system in the TrueCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, just enter the password for the decoy operating system in the TrueCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\nThe third password (for the outer volume) can be disclosed to anyone forcing you to reveal the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) reside. The existence of the hidden volume (and of the hidden operating system) will remain secret.</string>
<string lang="en" key="FIRST_HIDDEN_OS_BOOT_INFO">You have started a hidden operating system.\n\n\nAs you may have noticed, the hidden operating system appears to be installed on the same partition as the original operating system (now the decoy system). However, in reality, it is installed within the partition behind it (in the hidden volume). All read and write operations are being transparently redirected from the system partition to the hidden volume.\n\nNeither the operating system nor applications will know that data written to and read from the system partition are actually written to and read from the partition behind it (from/to a hidden volume). Any such data is encrypted and decrypted on the fly as usual (with an encryption key different from the one that is used for the decoy operating system).\n\n\nIMPORTANT: Please make sure you have read and follow the section "Security Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.</string>
<string lang="en" key="HIDVOL_HOST_FILLING_HELP_SYSENC">The outer volume has been created and mounted as drive %hc:. To this outer volume you should now copy some sensitive-looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. You will be able to reveal the password for this outer volume, and the existence of the hidden volume (and of the hidden operating system) will remain secret.\n\nIMPORTANT: The files you copy to the outer volume should not occupy more than %s. Otherwise, there may not be enough free space on the outer volume for the hidden volume (and you will not be able to continue). After you finish copying, click Next (do not dismount the volume).</string>
<string lang="en" key="HIDVOL_HOST_FILLING_HELP">Outer volume has been successfully created and mounted as drive %hc:. To this volume you should now copy some sensitive-looking files that you actually do NOT want to hide. The files will be there for anyone forcing you to disclose your password. You will reveal only the password for this outer volume, not for the hidden one. The files that you really care about will be stored in the hidden volume, which will be created later on. When you finish copying, click Next. Do not dismount the volume.\n\nNote: After you click Next, cluster bitmap of the outer volume will be scanned to determine the size of uninterrupted area of free space whose end is aligned with the end of the volume. This area will accommodate the hidden volume, so it will limit its maximum possible size. Cluster bitmap scanning ensures that no data on the outer volume are overwritten by the hidden volume.</string>
<string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP">\n\nIn the next steps, you will set the options for the outer volume (within which the hidden volume will be created later on). </string>
<string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer TrueCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</string>
<string lang="en" key="HIDDEN_OS_PRE_CIPHER_HELP">In the following steps, you will set the options and password for the hidden volume, which will contain the hidden operating system. However, note that the algorithms you select in the next step will also apply to the decoy operating system (it will be encrypted with the same encryption algorithm as the hidden operating system).\n\nRemark: The cluster bitmap of the outer volume has been scanned in order to determine the size of uninterrupted area of free space whose end is aligned with the end of the outer volume. This area will accommodate the hidden volume, so it limits its maximum possible size. The maximum possible size of the hidden volume has been determined and confirmed to be greater than the size of the system partition (which is required, because the entire content of the system partition will need to be copied to the hidden volume). This ensures that no data currently stored on the outer volume will be overwritten by data written to the area of the hidden volume.</string>
<string lang="en" key="HIDVOL_PRE_CIPHER_HELP">\n\nThe volume cluster bitmap has been scanned and the maximum possible size of the hidden volume has been determined. In the next steps you will set the options, the size, and the password for the hidden volume.</string>
<string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string>
<string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string>
<string lang="en" key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! TrueCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time TrueCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new TrueCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the outer and the hidden part). We strongly recommend that you restart the operating system now.</string>
<string lang="en" key="CAN_CREATE_ONLY_HIDDEN_VOLUMES_UNDER_HIDDEN_OS">When a hidden operating system is running, you can create only hidden TrueCrypt volumes.</string>
<string lang="en" key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only).\n\nTo create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal TrueCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the TrueCrypt Volume Creation Wizard.\n\n4) Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n5) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidden volume within it.</string>
<string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden TrueCrypt volumes are mounted as read-only (no data can be written to such filesystems or TrueCrypt volumes). Data is allowed to be written to filesystems within hidden TrueCrypt volumes.</string>
<string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are two main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden TrueCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.</string>
<string lang="en" key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal TrueCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a TrueCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</string>
<string lang="en" key="CONFIRM_RESTART">Your computer must be restarted.\n\nDo you want to restart it now?</string>
<string lang="en" key="CONFIRM_NOT_DISABLING_SWAP_FILES">WARNING: For security reasons, it is strongly recommended that you disable Windows paging files.\n\n\nNote: Windows uses paging files to hold parts of programs and data files that do not fit in memory. This means that sensitive data, which you believe are only stored in RAM, can actually be written to a hard disk by Windows without you knowing.\n\nIf the system partition is not encrypted, TrueCrypt cannot prevent the contents of sensitive files that are opened in RAM from being saved unencrypted to a paging file (note that when you open a file stored on a TrueCrypt volume, for example, in a text editor, then the content of the file is stored unencrypted in RAM).\n\nHowever, even if the system partition is encrypted, you may encounter the following issue, when paging files are enabled: For security reasons, all versions of TrueCrypt that support system encryption (5.0 and later) erase the master key (stored in RAM) with which the system partition or system drive is encrypted (as well as any other encryption keys and cached passwords for non-system volumes that are stored in RAM) whenever the computer is cleanly restarted or cleanly shut down. Before a key can be erased from RAM, the corresponding TrueCrypt volume must be dismounted. For non-system volumes, this does not cause any problems. However, as Microsoft currently does not provide any API for handling system shutdown, paging files located on encrypted system volumes that are dismounted during the system shutdown sequence (even though they are dismounted at the latest possible time during the shutdown sequence) may, in rare cases, still contain valid swapped-out memory pages (including portions of Windows system files). This may cause a blue screen error at the very end of the shutdown sequence. Note that files stored on the system drive are safely flushed to disk at that point in the shutdown sequence, so the integrity of the files is not affected by the system crash.\n\n\nAre you sure you do not want to disable Windows paging files?</string>
<string lang="en" key="FAILED_TO_DISABLE_PAGING_FILES">Error: Failed to disable Windows paging files.</string>
<string lang="en" key="SHUT_DOWN_COMPUTER_NOW">IMPORTANT: For security reasons, you must shut down (not hibernate) your computer now and then leave it powered off for several minutes. This is required to clear the memory, which contains potentially sensitive data.</string>
<string lang="en" key="ERR_GETTING_SYSTEM_ENCRYPTION_STATUS">An error occurred when obtaining the system encryption status.</string>
<string lang="en" key="INIT_SYS_ENC">Cannot initialize application components for system encryption.</string>
<string lang="en" key="INIT_MUTEX">Unable to initialize the application. Failed to create a required mutex object.</string>
<string lang="en" key="INIT_RAND">Failed to initialize the random number generator!</string>
<string lang="en" key="INIT_REGISTER">Unable to initialize the application. Failed to register the Dialog class.</string>
<string lang="en" key="INVALID_DEVICE">Invalid drive or partition specified. Use the following syntax to mount partitions: \\Device\\Harddisk0\\Partition4</string>
<string lang="en" key="MAX_HIDVOL_SIZE_BYTES">Maximum possible hidden volume size for this volume is %.2f bytes.</string>
<string lang="en" key="MAX_HIDVOL_SIZE_KB">Maximum possible hidden volume size for this volume is %.2f KB.</string>
<string lang="en" key="MAX_HIDVOL_SIZE_MB">Maximum possible hidden volume size for this volume is %.2f MB.</string>
<string lang="en" key="MOUNTED_NOPWCHANGE">Volume password/keyfiles cannot be changed while the volume is mounted. Please dismount the volume first.</string>
<string lang="en" key="MOUNTED_NO_PKCS5_PRF_CHANGE">The header key derivation algorithm cannot be changed while the volume is mounted. Please dismount the volume first.</string>
<string lang="en" key="NEW_VERSION_REQUIRED">A newer version of TrueCrypt is required to mount this volume.</string>
<string lang="en" key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'TrueCrypt Format.exe' is in the folder from which 'TrueCrypt.exe' was launched. If it is not, please reinstall TrueCrypt, or locate 'TrueCrypt Format.exe' on your disk and run it.</string>
<string lang="en" key="NEXT">&Next ></string>
<string lang="en" key="FINALIZE">&Finish</string>
<string lang="en" key="INSTALL">&Install</string>
<string lang="en" key="EXTRACT">E&xtract</string>
<string lang="en" key="NODRIVER">Unable to connect to the TrueCrypt device driver. TrueCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string>
<string lang="en" key="NOFONT">Error occurred when loading/preparing fonts.</string>
<string lang="en" key="NOT_FOUND">The drive letter was not found or no drive letter was specified.</string>
<string lang="en" key="DRIVE_LETTER_UNAVAILABLE">Drive letter not available.</string>
<string lang="en" key="NO_SPACE_FOR_HIDDEN_VOL">Not enough free space for the hidden volume! Volume creation cannot continue.</string>
<string lang="en" key="HIDDEN_VOLUME_TOO_SMALL_FOR_OS_CLONE">Error: The files you copied to the outer volume occupy too much space. Therefore, there is not enough free space on the outer volume for the hidden volume.\n\nNote that the hidden volume must be as large as the system partition (the partition where the currently running operating system is installed). The reason is that the hidden operating system needs to be created by copying the content of the system partition to the hidden volume.\n\n\nThe process of creation of the hidden operating system cannot continue.</string>
<string lang="en" key="OPENFILES_DRIVER">The driver is unable to dismount the volume. Some files located on the volume are probably still open.</string>
<string lang="en" key="OPENFILES_LOCK">Unable to lock the volume. There are still open files on the volume. Therefore, it cannot be dismounted.</string>
<string lang="en" key="OPEN_VOL_TITLE">Select a TrueCrypt Volume</string>
<string lang="en" key="OPEN_TITLE">Specify Path and File Name</string>
<string lang="en" key="OUTOFMEMORY">Out of Memory</string>
<string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a TrueCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a TrueCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a TrueCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. Therefore, it can be, for example, easily renamed, moved, or copied as any normal file. For more information, see the chapter Beginner's Tutorial in the TrueCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string>
<string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: TRUECRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new TrueCrypt container?</string>
<string lang="en" key="OVERWRITEPROMPT_DEVICE">CAUTION: ALL FILES CURRENTLY STORED ON THE SELECTED %s '%hs'%s WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string>
<string lang="en" key="OVERWRITEPROMPT_DEVICE_HIDDEN_OS_PARTITION">CAUTION: ANY FILES CURRENTLY STORED ON THE PARTITION '%hs'%s (I.E. ON THE FIRST PARTITION BEHIND THE SYSTEM PARTITION) WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string>
<string lang="en" key="PASSWORD_CHANGED">Password and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Precautions' in the TrueCrypt User Guide.</string>
<string lang="en" key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your TrueCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the TrueCrypt Rescue Disk and entering the old password). You should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string>
<string lang="en" key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your TrueCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string>
<string lang="en" key="PASSWORD_HELP">It is very important that you choose a good password. You should avoid choosing one that contains only a single word that can be found in a dictionary (or a combination of 2, 3, or 4 such words). It should not contain any names or dates of birth. It should not be easy to guess. A good password is a random combination of upper and lower case letters, numbers, and special characters, such as @ ^ = $ * + etc. We recommend choosing a password consisting of more than 20 characters (the longer, the better). The maximum possible length is 64 characters.</string>
<string lang="en" key="PASSWORD_HIDDENVOL_HELP">Please choose a password for the hidden volume. </string>
<string lang="en" key="PASSWORD_HIDDEN_OS_HELP">Please choose a password for the hidden operating system (i.e. for the hidden volume). </string>
<string lang="en" key="PASSWORD_HIDDEN_OS_NOTE">IMPORTANT: The password you choose for the hidden operating system in this step must be substantially different from the other two passwords (i.e. from the password for the outer volume and from the password for the decoy operating system).</string>
<string lang="en" key="PASSWORD_DECOY_OS_HELP">Please choose a password for the decoy operating system. This will be the password that you will be able to reveal to an adversary if you are asked or forced to disclose your pre-boot authentication password (the other password you can reveal is the one for the outer volume). The existence of the third password (i.e. the pre-boot authentication password for the hidden operating system) will remain secret.\n\nIMPORTANT: The password you enter above must be substantially different from the one you chose for the hidden volume (i.e. for the hidden operating system).</string>
<string lang="en" key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Please enter the password for the volume within which you wish to create a hidden volume.\n\nAfter you click Next, TrueCrypt will attempt to mount the volume. As soon as the volume is mounted, its cluster bitmap will be scanned to determine the size of the uninterrupted area of free space (if there is any) whose end is aligned with the end of the volume. This area will accommodate the hidden volume and therefore will limit its maximum possible size. Cluster map scanning is necessary to ensure that no data on the outer volume will be overwritten by the hidden volume.</string>
<string lang="en" key="PASSWORD_HIDDENVOL_HOST_HELP">\nPlease choose a password for the outer volume. This will be the password that you will be able to reveal to an adversary if you are asked or forced to do so.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume.\n\nNote: The maximum possible password length is 64 characters.</string>
<string lang="en" key="PASSWORD_SYSENC_OUTERVOL_HELP">Please choose a password for the outer volume. This will be the password you will be able to reveal to anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. The existence of the hidden volume (and of the hidden operating system) will remain secret. Note that this password is not for the decoy operating system.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume (i.e. for the hidden operating system).</string>
<string lang="en" key="PASSWORD_HIDDEN_OS_TITLE">Password for Hidden Operating System</string>
<string lang="en" key="PASSWORD_DECOY_OS_TITLE">Password for Decoy Operating System</string>
<string lang="en" key="PASSWORD_LENGTH_WARNING">WARNING: Short passwords are easy to crack using brute force techniques!\n\nWe recommend choosing a password consisting of more than 20 characters. Are you sure you want to use a short password?</string>
<string lang="en" key="PASSWORD_WRONG">Incorrect password or not a TrueCrypt volume.</string>
<string lang="en" key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a TrueCrypt volume.</string>
<string lang="en" key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a TrueCrypt volume.</string>
<string lang="en" key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a TrueCrypt volume.</string>
<string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no TrueCrypt volume found.</string>
<string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no TrueCrypt volume found.</string>
<string lang="en" key="PASSWORD_WRONG_CAPSLOCK_ON">\n\nWarning: Caps Lock is on. This may cause you to enter your password incorrectly.</string>
<string lang="en" key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' > 'Mount Without Pre-Boot Authentication'.</string>
<string lang="en" key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</string>
<string lang="en" key="PREV">< &Back</string>
<string lang="en" key="RAWDEVICES">Unable to list raw devices installed on your system!</string>
<string lang="en" key="READONLYPROMPT">The volume '%hs' exists, and is read-only. Are you sure you want to replace it?</string>
<string lang="en" key="SELECT_KEYFILE_PATH">Select a keyfile search path. WARNING: Note that only the path will be remembered, not the filenames!</string>
<string lang="en" key="SERPENT_HELP">Designed by Ross Anderson, Eli Biham, and Lars Knudsen. Published in 1998. 256-bit key, 128-bit block. Mode of operation is XTS. Serpent was one of the AES finalists.</string>
<string lang="en" key="SETFILETIME_FAILED_IMPLANT">WARNING: Failed to restore container timestamp (file modification/access date/time)!\n\nThe plausible deniability of the hidden volume might be affected.</string>
<string lang="en" key="SETFILETIME_FAILED_PREP_IMPLANT">WARNING: Failed to restore container timestamp!\n\nIf you do not reset the timestamp using an external tool, we recommend that you do not create a hidden volume within this container.</string>
<string lang="en" key="SETFILETIME_FAILED_PW">WARNING: Failed to restore container timestamp (file modification/access date/time)!\n\nIf there is a hidden volume within this container, the plausible deniability of the hidden volume might be affected.</string>
<string lang="en" key="SETFILETIME_FAILED_KEYFILE">WARNING: Failed to restore keyfile timestamp! Cannot preserve last access date/time.\n\nIt will be possible to tell that this file has been accessed.</string>
<string lang="en" key="SIZE_HELP">Please specify the size of the container to create.\n\nIf you create a dynamic (sparse-file) container, this parameter will specify its maximum size.\n\nNote that the minimum possible size of a FAT volume is 275 KB. The minimum possible size of an NTFS volume is 2829 KB.</string>
<string lang="en" key="SIZE_HELP_HIDDEN_HOST_VOL">Please specify the size of the outer volume to be created (you will first create the outer volume and then a hidden volume within it). The minimum possible size of a volume within which a hidden volume is intended to be created is 305 KB.</string>
<string lang="en" key="SIZE_HELP_HIDDEN_VOL">Please specify the size of the hidden volume to create. The minimum possible size of a FAT volume is 275 KB. The minimum possible size of an NTFS volume is 2829 KB. The maximum possible size you can specify for the hidden volume is displayed above.</string>
<string lang="en" key="SIZE_PARTITION_HELP">Size of a device or partition cannot be modified. Please verify that the size of the selected device or partition shown above is correct and click Next.</string>
<string lang="en" key="SIZE_PARTITION_HIDDEN_SYSENC_HELP">The outer volume and the hidden volume (containing the hidden operating system) will reside within the above partition. It should be the first partition behind the system partition.\n\nPlease verify that the size of the partition and its number shown above are correct, and if they are, click Next.</string>
<string lang="en" key="SIZE_PARTITION_HIDDEN_VOL_HELP">\n\nNote that the minimum possible size of a volume within which a hidden volume is intended to be created is 305 KB.</string>
<string lang="en" key="TESTS_PASSED">Self-tests of all algorithms passed</string>
<string lang="en" key="TEST_INCORRECT_TEST_DATA_UNIT_SIZE">The data unit number that you supplied is too long or short.</string>
<string lang="en" key="TEST_INCORRECT_SECONDARY_KEY_SIZE">The secondary key that you supplied is too long or short.</string>
<string lang="en" key="TEST_CIPHERTEXT_SIZE">The test ciphertext you have supplied is too long or short.</string>
<string lang="en" key="TEST_KEY_SIZE">The test key you have supplied is too long or short.</string>
<string lang="en" key="TEST_PLAINTEXT_SIZE">The test plaintext you have supplied is too long or short.</string>
<string lang="en" key="TWO_LAYER_CASCADE_HELP">Two ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key) and then with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string>
<string lang="en" key="THREE_LAYER_CASCADE_HELP">Three ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key), then with %hs (%d-bit key), and finally with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string>
<string lang="en" key="TRAVELER_DISK_CREATED">TrueCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run TrueCrypt in traveler mode. Also note that, after examining the registry file, it may be possible to tell that TrueCrypt was run on a Windows system even if it is run in traveler mode.</string>
<string lang="en" key="TWOFISH_HELP">Designed by Bruce Schneier, John Kelsey, Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson. Published in 1998. 256-bit key, 128-bit block. Mode of operation is XTS. Twofish was one of the AES finalists.</string>
<string lang="en" key="MORE_INFO_ABOUT">More information on %hs</string>
<string lang="en" key="UNKNOWN">Unknown</string>
<string lang="en" key="ERR_UNKNOWN">An unspecified or unknown error occurred.</string>
<string lang="en" key="UNKNOWN_DRIVER_CODE">The device driver returned an unrecognized error, code = %d</string>
<string lang="en" key="UNMOUNTALL_LOCK_FAILED">Some volumes contain files or folders being used by applications or system.\n\nForce dismount?</string>
<string lang="en" key="VOL_TOO_SMALL">The volume is too small - it is an invalid volume.</string>
<string lang="en" key="WARN_QUICK_FORMAT">WARNING: You should use Quick Format only in the following cases:\n\n1) The device contains random data (e.g. has already been securely and fully encrypted).\n2) You are going to use all available space immediately.\n3) You are not concerned with security (testing).\n\nAre you sure you want to use Quick Format?</string>
<string lang="en" key="CONFIRM_SPARSE_FILE">Dynamic container is a pre-allocated NTFS sparse file whose physical size (actual disk space used) grows as new data is added to it.\n\nWARNING: Performance of sparse-file-hosted volumes is significantly worse than performance of regular volumes. Sparse-file-hosted volumes are also less secure, because it is possible to tell which volume sectors are unused. Furthermore, if data is written to a sparse file container when there is not enough free space in the host file system, the encrypted file system may get corrupted.\n\nAre you sure you want to create a sparse-file-hosted volume?</string>
<string lang="en" key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by TrueCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in TrueCrypt), then select 'Properties' and see the 'Size on disk' value.</string>
<string lang="en" key="WIPE_CACHE">Passwords stored in the device driver cache have been wiped.</string>
<string lang="en" key="WRONG_VOL_TYPE">TrueCrypt cannot change the password for a foreign volume.</string>
<string lang="en" key="SELECT_FREE_DRIVE">Please select a free drive letter from the list.</string>
<string lang="en" key="SELECT_A_MOUNTED_VOLUME">Please select a mounted volume in the drive letter list.</string>
<string lang="en" key="FORMAT_NTFS_FAILED">Windows failed to format the volume as NTFS.\n\nPlease select a different type of file system (if possible) and try again. Alternatively, you could leave the volume unformatted (select 'None' as the filesystem), exit this wizard, mount the volume, and then use either a system or a third-party tool to format the mounted volume (the volume will remain encrypted).</string>
<string lang="en" key="FORMAT_NTFS_FAILED_ASK_FAT">Windows failed to format the volume as NTFS.\n\nDo you want to format the volume as FAT instead?</string>
<string lang="en" key="CLUSTER_TOO_SMALL">The selected cluster size is too small for this volume size. A greater cluster size will be used instead.</string>
<string lang="en" key="CANT_GET_VOLSIZE">Error: Cannot get volume size!\n\nMake sure the selected volume is not being used by the system or an application.</string>
<string lang="en" key="HIDDEN_VOL_HOST_SPARSE">Hidden volumes shall not be created within dynamic (sparse file) containers. To achieve plausible deniability, the hidden volume shall be created within a regular volume.</string>
<string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</string>
<string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</string>
<string lang="en" key="HIDDEN_VOL_HOST_NTFS">Note: The FAT file system is more suitable for outer volumes than the NTFS file system (for example, the maximum possible size of the hidden volume would very likely have been significantly greater if the outer volume had been formatted as FAT).</string>
<string lang="en" key="HIDDEN_VOL_HOST_NTFS_ASK">Note that the FAT file system is more suitable for outer volumes than the NTFS file system. For example, the maximum possible size of the hidden volume will very likely be significantly greater if the outer volume is formatted as FAT (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume can reside only in the second half of the outer volume).\n\nAre you sure you want to format the outer volume as NTFS?</string>
<string lang="en" key="OFFER_FAT_FORMAT_ALTERNATIVE">Do you want to format the volume as FAT instead?</string>
<string lang="en" key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed).</string>
<string lang="en" key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 110% (2.1 times) larger than the system partition (the system partition is the one where the currently running operating system is installed). The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the partition.</string>
<string lang="en" key="OUTER_VOLUME_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: If the outer volume is formatted as NTFS, it must be at least 110% (2.1 times) larger than the system partition. The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the outer volume.\n\nNote: The outer volume needs to reside within the same partition as the hidden operating system (i.e. within the first partition behind the system partition).</string>
<string lang="en" key="NO_PARTITION_FOLLOWS_BOOT_PARTITION">Error: There is no partition behind the system partition.\n\nNote that before you can create a hidden operating system, you need to create a partition for it on the system drive. It must be the first partition behind the system partition and it must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed). However, if the outer volume (not to be confused with the system partition) is formatted as NTFS, the partition for the hidden operating system must be at least 110% (2.1 times) larger than the system partition (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume, which is to contain a clone of the system partition, can reside only in the second half of the partition).</string>
<string lang="en" key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two TrueCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</string>
<string lang="en" key="FOR_MORE_INFO_ON_PARTITIONS">For information on how to create and manage partitions, please refer to the documentation supplied with your operating system or contact your computer vendor's technical support team for assistance.</string>
<string lang="en" key="SYSTEM_PARTITION_NOT_ACTIVE">Error: The currently running operating system is not installed on the boot partition (first Active partition). This is not supported.</string>
<string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this TrueCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the outer volume as FAT?</string>
<string lang="en" key="CANT_ACCESS_VOL">Error: Cannot access the volume!\n\nMake sure that the selected volume exists, that it is not mounted or being used by the system or an application, that you have read/write permission for the volume, and that it is not write-protected.</string>
<string lang="en" key="CANT_DISMOUNT_OUTER_VOL">Error: Cannot dismount the outer volume!\n\nVolume cannot be dismounted if it contains files or folders being used by a program or the system.\n\nPlease close any program that might be using files or directories on the volume and click Retry.</string>
<string lang="en" key="CANT_GET_OUTER_VOL_INFO">Error: Cannot obtain information about the outer volume!\nVolume creation cannot continue.</string>
<string lang="en" key="SETUP_MODE_INFO">Select one of the modes. If you are not sure which to select, use the default mode.</string>
<string lang="en" key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install or update TrueCrypt on this system.</string>
<string lang="en" key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run TrueCrypt in so-called traveler (portable) mode. TrueCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'TrueCrypt.exe' (then TrueCrypt will run in traveler mode). You can also move the extracted files to other computers.</string>
<string lang="en" key="EXTRACTION_FINISHED_INFO">All files have been successfully extracted to the destination location.</string>
<string lang="en" key="AUTO_FOLDER_CREATION">If the specified folder does not exist, it will be automatically created.</string>
<string lang="en" key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of TrueCrypt?</string>
<string lang="en" key="AFTER_INSTALL_TUTORIAL">If you have never used TrueCrypt before, we recommend that you read the chapter Beginner's Tutorial in the TrueCrypt User Guide. Do you want to view the tutorial?</string>
<string lang="en" key="SELECT_AN_ACTION">Please select an action to perform from the following:</string>
<string lang="en" key="SETUP_ADMIN">To successfully install/uninstall TrueCrypt you must have Administrator rights, do you want to continue?</string>
<string lang="en" key="TC_INSTALLER_IS_RUNNING">TrueCrypt Installer is currently running on this system and performing or preparing installation or update of TrueCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string>
<string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official TrueCrypt website at www.truecrypt.org).</string>
<string lang="en" key="ROLLBACK">The installation has been rolled back.</string>
<string lang="en" key="INSTALL_OK">TrueCrypt has been successfully installed.</string>
<string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">TrueCrypt has been upgraded to a new version. Before you can start using it, your computer must be restarted.\n\nDo you want to restart it now?</string>
<string lang="en" key="UNINSTALL_OK">TrueCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the TrueCrypt installer and the folder %hs. Note that the folder will not be removed if it contains any files that were not installed by the TrueCrypt installer or created by TrueCrypt.</string>
<string lang="en" key="CANT_CREATE_FOLDER">The folder '%hs' could not be created</string>
<string lang="en" key="CLOSE_TC_FIRST">The TrueCrypt device driver cannot be unloaded.\n\nPlease close all open TrueCrypt windows first. If it does not help, please restart Windows and then try again.</string>
<string lang="en" key="DISMOUNT_ALL_FIRST">All TrueCrypt volumes must be dismounted before installing or uninstalling TrueCrypt.</string>
<string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of TrueCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of TrueCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. After you uninstall the old version of TrueCrypt, run the installer of the new version of TrueCrypt again.</string>
<string lang="en" key="REG_INSTALL_FAILED">The installation of the registry entries has failed</string>
<string lang="en" key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing TrueCrypt again.</string>
<string lang="en" key="DRIVER_UINSTALL_FAILED">Uninstallation of the device driver has failed. Please note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be uninstalled (or reinstalled).</string>
<string lang="en" key="ENTER_PASSWORD_FOR">Enter password for %hs</string>
<string lang="en" key="ENTER_NORMAL_VOL_PASSWORD">Enter password for the normal/outer volume</string>
<string lang="en" key="ENTER_HIDDEN_VOL_PASSWORD">Enter password for the hidden volume</string>
<string lang="en" key="ENTER_HEADER_BACKUP_PASSWORD">Enter password for the header stored in backup file</string>
<string lang="en" key="KEYFILE_CREATED">Keyfile has been successfully created.</string>
<string lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! TrueCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</string>
<string lang="en" key="VOL_HEADER_BACKED_UP">Volume header backup has been successfully created.\n\nIMPORTANT: Restoring the volume header using this backup will also restore the current volume password. Moreover, if keyfile(s) are/is necessary to mount the volume, the same keyfile(s) will be necessary to mount the volume again when the volume header is restored.\n\nWARNING: This volume header backup may be used to restore the header ONLY of this particular volume. If you use this header backup to restore a header of a different volume, you will be able to mount the volume, but you will NOT be able to decrypt any data stored in the volume (because you will change its master key).</string>
<string lang="en" key="VOL_HEADER_RESTORED">The volume header has been successfully restored.\n\nIMPORTANT: Please note that an old password may have been restored as well. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) are now necessary to mount the volume again.</string>
<string lang="en" key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</string>
<string lang="en" key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %hs?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that TrueCrypt determines the type through the process of trial and error).</string>
<string lang="en" key="CONFIRM_VOL_HEADER_RESTORE">Are you sure you want to restore volume header of %hs?\n\nWARNING: Restoring a volume header also restores the volume password that was valid when the backup was created. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) will be necessary to mount the volume again after the volume header is restored.\n\nAfter you click Yes, you will select the header backup file.</string>
<string lang="en" key="DOES_VOLUME_CONTAIN_HIDDEN">Does the volume contain a hidden volume?</string>
<string lang="en" key="VOLUME_CONTAINS_HIDDEN">The volume contains a hidden volume</string>
<string lang="en" key="VOLUME_DOES_NOT_CONTAIN_HIDDEN">The volume does not contain a hidden volume</string>
<string lang="en" key="HEADER_RESTORE_EXTERNAL_INTERNAL">Please select the type of volume header backup you want to use:</string>
<string lang="en" key="HEADER_RESTORE_INTERNAL">Restore the volume header from the backup embedded in the volume</string>
<string lang="en" key="HEADER_RESTORE_EXTERNAL">Restore the volume header from an external backup file</string>
<string lang="en" key="HEADER_BACKUP_SIZE_INCORRECT">The size of the volume header backup file is incorrect.</string>
<string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by TrueCrypt 6.0 or later contain embedded backup headers).</string>
<string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string>
<string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual TrueCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string>
<string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new TrueCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
<string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to write (burn) the Rescue Disk to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that the Rescue Disk has been correctly burned.</string>
<string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your TrueCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
<string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The TrueCrypt Rescue Disk has been successfully verified.</string>
<string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
<string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">TrueCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a TrueCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string>
<string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
<string lang="en" key="CONFIRM_SAVE_FAVORITE_VOL">Save all currently mounted volumes and their drive letters to the Favorite Volumes list?\n\nNote: If no volumes are mounted, the Favorite Volumes list will be deleted.</string>
<string lang="en" key="DISMOUNT_FIRST">Please dismount the volume before proceeding.</string>
<string lang="en" key="CANNOT_SET_TIMER">Error: Cannot set timer.</string>
<string lang="en" key="TWO_OR_MORE">2 or more</string>
<string lang="en" key="MODE_OF_OPERATION">Mode of Operation</string>
<string lang="en" key="UNSUPPORTED_CHARS_IN_PWD">Error: Password must contain only ASCII characters.\n\nNon-ASCII characters in password might cause the volume to be impossible to mount when your system configuration changes.\n\nThe following characters are allowed:\n\n ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \\ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w k y z { | } ~</string>
<string lang="en" key="UNSUPPORTED_CHARS_IN_PWD_RECOM">Warning: Password contains non-ASCII characters. This may cause the volume to be impossible to mount when your system configuration changes.\n\nYou should replace all non-ASCII characters in the password with ASCII characters. To do so, click 'Volumes' -> 'Change Volume Password'.\n\nThe following are ASCII characters:\n\n ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \\ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w k y z { | } ~</string>
<string lang="en" key="EXE_FILE_EXTENSION_CONFIRM">WARNING: We strongly recommend that you avoid file extensions that are used for executable files (such as .exe, .sys, or .dll) and other similarly problematic file extensions. Using such file extensions causes Windows and antivirus software to interfere with the container, which adversely affects the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension or change it (for example, to .raw, .iso, .img, .dat, or .rnd).\n\nAre you sure you want to use the problematic file extension?</string>
<string lang="en" key="EXE_FILE_EXTENSION_MOUNT_WARNING">WARNING: This container has a file extension that is used for executable files (such as .exe, .sys, or .dll) or other similarly problematic file extension. It will very likely cause Windows and antivirus software to interfere with the container, which will adversely affect the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension of the container or change it (for example, to .raw, .iso, .img, .dat, or .rnd) after you dismount the volume.</string>
<string lang="en" key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.</string>
<string lang="en" key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</string>
<string lang="en" key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of TrueCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</string>
<string lang="en" key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted TrueCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</string>
<string lang="en" key="FREE_SPACE_FOR_WRITING_TO_OUTER_VOLUME">WARNING: If you want to be able to add more data/files to the outer volume in future, you should consider choosing a smaller size for the hidden volume.\n\nAre you sure you want to continue with the size you specified?</string>
<string lang="en" key="NO_VOLUME_SELECTED">No volume selected.\n\nClick 'Select Device' or 'Select File' to select a TrueCrypt volume.</string>
<string lang="en" key="NO_SYSENC_PARTITION_SELECTED">No partition selected.\n\nClick 'Select Device' to select a dismounted partition that normally requires pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system, which is not running, or the encrypted system partition of another operating system).\n\nNote: The selected partition will be mounted as a regular TrueCrypt volume without pre-boot authentication. This is useful e.g. for backup or repair operations.</string>
<string lang="en" key="CONFIRM_SAVE_DEFAULT_KEYFILES">WARNING: If default keyfiles are set and enabled, volumes that are not using these keyfiles will be impossible to mount. Therefore, after you enable default keyfiles, keep in mind to uncheck the 'Use keyfiles' checkbox (below a password input field) whenever mounting such volumes.\n\nAre you sure you want to save the selected keyfiles/paths as default?</string>
<string lang="en" key="CANNOT_USE_RESERVED_KEY">Error: This shortcut is reserved. Please choose a different shortcut.</string>
<string lang="en" key="SHORTCUT_ALREADY_IN_USE">Error: Shortcut already in use.</string>
<string lang="en" key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more TrueCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as TrueCrypt.</string>
<string lang="en" key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents TrueCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. TrueCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</string>
<string lang="en" key="MOUNTED_VOLUMES_DISMOUNTED">All mounted TrueCrypt volumes have been dismounted.</string>
<string lang="en" key="MOUNTED_VOLUMES_AUTO_DISMOUNTED">All mounted TrueCrypt volumes have been auto-dismounted.\n\nNote: You can disable or configure auto-dismount in the 'Auto-Dismount' section of the Preferences window (select Settings -> Preferences).</string>
<string lang="en" key="DISMOUNT_ALL_ATTEMPT_COMPLETED">Attempt to dismount all mounted TrueCrypt volumes completed.</string>
<string lang="en" key="VOLUMES_DISMOUNTED_CACHE_WIPED">All mounted TrueCrypt volumes have been dismounted and password cache has been wiped.</string>
<string lang="en" key="CONFIRM_TIMESTAMP_UPDATING">WARNING: If timestamps are not preserved, plausible deniability may be adversely affected!\n\nAre you sure you do not want container timestamps to be preserved?</string>
<string lang="en" key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the TrueCrypt Background Task is disabled, the following functions will be disabled whenever you exit TrueCrypt:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon log off, inadvertent host device removal, time-out, etc.)\n3) Notifications (e.g., when damage to hidden volume is prevented)\n4) Tray icon\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to disable the TrueCrypt Background Task?</string>
<string lang="en" key="CONFIRM_NO_FORCED_AUTODISMOUNT">WARNING: If this option is disabled, volumes containing open files/directories will not be possible to auto-dismount.\n\nAre you sure you want to disable this option?</string>
<string lang="en" key="WARN_PREF_AUTO_DISMOUNT">WARNING: Volumes containing open files/directories will NOT be auto-dismounted.\n\nTo prevent this, enable the following option in this dialog window: 'Force auto-dismount even if volume contains open files or directories'</string>
<string lang="en" key="SYSTEM_ENCRYPTION_RESUME_PROMPT">You have scheduled the process of encryption or decryption of the system partition/drive. The process has not been completed yet.\n\nDo you want to start (resume) the process now?</string>
<string lang="en" key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string>
<string lang="en" key="CONFIRM_EXIT">WARNING: If TrueCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon log off, inadvertent host device removal, time-out, etc.)\n3) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish TrueCrypt to run in the background, disable the TrueCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of TrueCrypt in the Preferences).\n\nAre you sure you want TrueCrypt to exit?</string>
<string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string>
<string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string>
<string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</string>
<string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</string>
<string lang="en" key="FAILED_TO_INTERRUPT_SYSTEM_ENCRYPTION">Error: Failed to interrupt the process of encryption/decryption of the system partition/drive.</string>
<string lang="en" key="FAILED_TO_RESUME_SYSTEM_ENCRYPTION">Error: Failed to resume the process of encryption/decryption of the system partition/drive.</string>
<string lang="en" key="INCONSISTENCY_RESOLVED">Inconsistency resolved.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string>
<string lang="en" key="NOTHING_TO_RESUME">There is no process/task to resume.</string>
<string lang="en" key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: TrueCrypt Background Task is disabled. After you exit TrueCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nEnable TrueCrypt Background Task?</string>
<string lang="en" key="CHECKING_FS">Checking the file system on the TrueCrypt volume mounted as %hs...</string>
<string lang="en" key="REPAIRING_FS">Attempting to repair the file system on the TrueCrypt volume mounted as %hs...</string>
<string lang="en" key="WARN_CBC_MODE">Warning: This volume is encrypted in CBC mode. Due to security issues, CBC mode has been deprecated since TrueCrypt 4.1.\n\nWe strongly recommend that you move data from this TrueCrypt volume to a new volume created by this version of TrueCrypt. After you do so, you should securely erase or destroy the old volume. For more information, please see the Version History in the documentation or the release notices distributed with TrueCrypt 4.1 or later.</string>
<string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of TrueCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new TrueCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string>
<string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted TrueCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string>
<string lang="en" key="SYS_ASSIGN_DRIVE_LETTER">Please assign a drive letter to the partition/device before proceeding ('Control Panel' > 'System and Maintenance' > 'Administrative Tools' - 'Create and format hard disk partitions').\n\nNote that this is a requirement of the operating system.</string>
<string lang="en" key="DISMOUNT_ALL_TC_VOLUMES">Dismount all TrueCrypt volumes</string>
<string lang="en" key="UAC_INIT_ERROR">TrueCrypt failed to obtain Administrator privileges.</string>
<string lang="en" key="ERR_ACCESS_DENIED">Access was denied by the operating system.\n\nPossible cause: The operating system requires that you have read/write permission (or administrator privileges) for certain folders, files, and devices, in order for you to be allowed to read and write data to/from them. Normally, a user without administrator privileges is allowed to create, read and modify files in his or her Documents folder.</string>
<string lang="en" key="LARGE_SECTOR_UNSUPPORTED">Error: The device uses a sector size other than 512 bytes.\n\nIt is currently not possible to create device-hosted volumes on devices that use a sector size other than 512 bytes. However, note that you can create a file-hosted volume (container) on this device.</string>
<string lang="en" key="NO_SPACE_FOR_BOOT_LOADER">The TrueCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the TrueCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in TrueCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</string>
<string lang="en" key="FEATURE_UNSUPPORTED_ON_CURRENT_OS">The feature is not supported on the version of the operating system you are currently using.</string>
<string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">TrueCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</string>
<string lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires TrueCrypt to be installed on this system (you are running TrueCrypt in traveler mode).</string>
<string lang="en" key="WINDOWS_NOT_ON_BOOT_DRIVE_ERROR">Error: Windows is not installed on the drive from which it boots. This is not supported.</string>
<string lang="en" key="GPT_BOOT_DRIVE_UNSUPPORTED">Your system drive has a GUID partition table (GPT). Currently, only drives with a MBR partition table are supported.</string>
<string lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The TrueCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</string>
<string lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your Windows installation medium to replace the TrueCrypt Boot Loader with the Windows system loader.</string>
<string lang="en" key="SYS_LOADER_UNAVAILABLE_FOR_RESCUE_DISK">The original system loader will not be stored on the Rescue Disk (probable cause: missing backup file).</string>
<string lang="en" key="ERROR_MBR_PROTECTED">Failed to write the MBR sector.\n\nYour BIOS may be configured to protect the MBR sector. Check your BIOS settings (press F2, Delete, or Esc, after powering on your computer) for MBR/antivirus protection.</string>
<string lang="en" key="SYS_PARTITION_OR_DRIVE_APPEARS_FULLY_ENCRYPTED">Your system partition/drive appears to be fully encrypted.</string>
<string lang="en" key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">TrueCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</string>
<string lang="en" key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista (or later versions of Windows). On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.</string>
<string lang="en" key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended partition on the drive would be inaccessible after you start encrypting.\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</string>
<string lang="en" key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Do you want to encrypt the system partition instead of the entire drive?\n\nNote that you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive (in addition to encrypting the system partition).</string>
<string lang="en" key="WHOLE_SYC_DEVICE_RECOM">As your system drive contains only a single partition that occupies the whole drive, it is preferable (more secure) to encrypt the entire drive including the free "slack" space that typically surrounds such a partition.\n\nDo you want to encrypt the entire system drive?</string>
<string lang="en" key="DECOY_OS_REQUIREMENTS">The currently running operating system must meet the following conditions:\n\n1) It must not contain any sensitive data because it will become the decoy operating system (it should, however, contain some sensitive-looking decoy files that you actually do NOT want to hide, which will be there for anyone forcing you to disclose your pre-boot authentication password; you can add such decoy files to it later).\n\n2) If it requires activation, it must be activated before proceeding. The reason is that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). If you activated a hidden operating system, the date and time of the activation (and other data) might be logged on a Microsoft server (and on the hidden operating system) but not on the decoy operating system. Therefore, if an adversary had access to the data stored on the server or intercepted your request to the server (and if you revealed the password for the decoy operating system to him), he might find out that the decoy operating system was activated at a different time, which might indicate the existence of a hidden operating system on your computer.\n\nNote: In addition, before proceeding, make sure you have read the section "Security Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above conditions?</string>
<string lang="en" key="NO_HIBERNATION_DURING_HIDDEN_OS_CREATION">IMPORTANT: Until the process of creation of the hidden operating system is completed, the computer must not be hibernated. Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: When a computer hibernates, the content of its system memory is written to a hibernation storage file residing on the system drive. Therefore, if an adversary analyzed the content of the hibernation storage file (residing on the system partition of the decoy system), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).</string>
<string lang="en" key="DISABLE_SWAP_FILE_BEFORE_CREATING_HIDDEN_OS">Error: Paging files are enabled.\n\nUntil the process of creation of the hidden operating system is completed, paging files must disabled on this system. Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nThe TrueCrypt installer disables paging files by default. Please run the TrueCrypt installer and reinstall TrueCrypt (using the default settings). Then restart the computer and run this wizard again.\n\nNote: Windows uses paging files to hold parts of programs and data files that do not fit in memory. This means that sensitive data, which you believe are only stored in RAM, can actually be written to a hard drive by Windows without you knowing. Therefore, if an adversary analyzed the content of a paging file (residing on the system partition of the decoy system), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).</string>
<string lang="en" key="GAP_BETWEEN_SYS_AND_HIDDEN_OS_PARTITION">Warning: There is unallocated space between the system partition and the first partition behind it. After you create the hidden operating system, you must not create any new partitions in that unallocated space. Otherwise, the hidden operating system will be impossible to boot (until you delete such newly created partitions).</string>
<string lang="en" key="ALGO_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">This algorithm is currently not supported for system encryption.</string>
<string lang="en" key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: TrueCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</string>
<string lang="en" key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for TrueCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</string>
<string lang="en" key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As TrueCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</string>
<string lang="en" key="KEYB_LAYOUT_CHANGE_PREVENTED">TrueCrypt prevented change of keyboard layout.</string>
<string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. TrueCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string>
<string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a TrueCrypt Rescue Disk (TRD), which serves the following purposes:\n\n- If the TrueCrypt Boot Loader, master key, or other critical data gets damaged, the TRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If the TrueCrypt Boot Loader gets damaged or infected with malware, you can avoid running it by booting directly from the TRD.\n\n- If Windows gets damaged and cannot start, the TRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The TRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.</string>
<string lang="en" key="RESCUE_DISK_BURN_INFO">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to write (burn) the Rescue Disk to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.\n\nAfter you burn the Rescue Disk, click Next to verify that the Rescue Disk has been correctly burned.</string>
<string lang="en" key="RESCUE_DISK_BURN_INFO_NO_CHECK">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you should either write (burn) the Rescue Disk to a CD/DVD or move the ISO image to a safe location for later use.\n\nIf you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, you can click the link below to download such free software.\n\nClick Next to continue.</string>
<string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a TrueCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new TrueCrypt Rescue Disk for it even if you use the same password.</string>
<string lang="en" key="CANNOT_SAVE_SYS_ENCRYPTION_SETTINGS">Error: Cannot save system encryption settings.</string>
<string lang="en" key="CANNOT_INITIATE_SYS_ENCRYPTION_PRETEST">Cannot initiate the system encryption pretest.</string>
<string lang="en" key="CANNOT_INITIATE_HIDDEN_OS_CREATION">Cannot initiate the process of creation of the hidden operating system.</string>
<string lang="en" key="WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when TrueCrypt encrypts an unencrypted system partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is ever written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string>
<string lang="en" key="WIPE_MODE_WARN">WARNING: Note that when you choose e.g. the 3-pass wipe mode, the time necessary to encrypt the drive/partition will be up to 4 times longer. Likewise, if you choose the 35-pass wipe mode, it will be up to 36 times longer (it might even take several weeks).\n\nHowever, please note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is ever written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk (so the performance will NOT be affected).\n\nAre you sure you want to use the wipe mode?</string>
<string lang="en" key="SYS_MULTI_BOOT_MODE_TITLE">Number of Operating Systems</string>
<string lang="en" key="MULTI_BOOT_FOR_ADVANCED_ONLY">WARNING: Inexperienced users should never attempt to encrypt Windows in multi-boot configurations.\n\nContinue?</string>
<string lang="en" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_HELP">Is the currently running operating system installed on the boot drive?\n\nNote: Sometimes, Windows is not installed on the same drive as the Windows boot loader (boot partition). If that is the case, select 'No'.</string>
<string lang="en" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">TrueCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</string>
<string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_TITLE">Number of System Drives</string>
<string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_HELP">How many drives contain an operating system?\n\nNote: For example, if you have any operating system (e.g. Windows, Mac OS X, Linux, etc.) installed on your primary drive and any additional operating system installed on your secondary drive, select '2 or more'.</string>
<string lang="en" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">TrueCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</string>
<string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_TITLE">Multiple Systems on Single Drive</string>
<string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_HELP">Are there any other operating systems installed on the drive on which the currently running operating system is installed?\n\nNote: For example, if the currently running operating system is installed on the drive #0, which contains several partitions, and if one of the partitions contains Windows and another partition contains any additional operating system (e.g. Windows, Mac OS X, Linux, etc.), select 'Yes'.</string>
<string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_HELP">Is a non-Windows boot loader (or boot manager) installed in the master boot record (MBR)?\n\nNote: For example, if the first track of the boot drive contains GRUB, LILO, XOSL, or some other non-Windows boot manager (or boot loader), select 'Yes'.</string>
<string lang="en" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">TrueCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the TrueCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the TrueCrypt Boot Loader screen) and thus you will be able boot Linux.</string>
<string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the TrueCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string>
<string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_TITLE">Encryption of Host Protected Area</string>
<string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want TrueCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string>
<string lang="en" key="SYSENC_TYPE_PAGE_TITLE">Type of System Encryption</string>
<string lang="en" key="SYSENC_NORMAL_TYPE_HELP">Select this option if you merely want to encrypt the system partition or the entire system drive.</string>
<string lang="en" key="SYSENC_HIDDEN_TYPE_HELP">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion). If you select this option, you will create a hidden operating system whose existence will be impossible to prove (the currently running operating system will be encrypted as well and it will become a so-called decoy operating system). Thus, you will not have to decrypt or reveal the password to the hidden operating system.</string>
<string lang="en" key="HIDDEN_OS_PREINFO">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion).\n\nUsing this wizard, you can create a hidden operating system whose existence will be impossible to prove (the currently running operating system will be encrypted as well and it will become a so-called decoy operating system). Thus, you will not have to decrypt or reveal the password for the hidden operating system.</string>
<string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two TrueCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). TrueCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, the currently running operating system will be encrypted and will become a so-called decoy OS. It must not contain any sensitive files and will be there for anyone forcing you to disclose your pre-boot authentication password. In total, there will be three passwords. Two of them can be revealed to an attacker (for the decoy OS and outer volume). If you use the third password, the hidden OS will start.</string>
<string lang="en" key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while TrueCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start TrueCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in TrueCrypt.</string>
<string lang="en" key="SYS_ENCRYPTION_SPAN_TITLE">Area to Encrypt</string>
<string lang="en" key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which your Windows is installed and from which it boots. The whole drive, including all its partitions, will be encrypted except the first track where the TrueCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</string>
<string lang="en" key="COLLECTING_RANDOM_DATA_TITLE">Collecting Random Data</string>
<string lang="en" key="RESCUE_DISK_DISK_VERIFIED_TITLE">Rescue Disk Verified</string>
<string lang="en" key="RESCUE_DISK_VERIFIED_INFO">\nThe TrueCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</string>
<string lang="en" key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the TrueCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</string>
<string lang="en" key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by TrueCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The TrueCrypt Boot Loader user interface is completely in English.\n\nContinue?</string>
<string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, TrueCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the TrueCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the TrueCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</string>
<string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2">IMPORTANT NOTES -- PLEASE READ OR PRINT (click 'Print'):\n\nNote that none of your files will be encrypted before you successfully restart your computer and start Windows. Thus, if anything fails, your data will NOT be lost. However, if something does go wrong, you might encounter difficulties in starting your Windows. Therefore, please read (and, if possible, print) the following guidelines on what to do if your Windows cannot start after you restart the computer.\n\nWhat to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but TrueCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the TrueCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then your Windows should start (provided that it is not encrypted) and TrueCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n- If the previous steps do not help or if the TrueCrypt Boot Loader screen does not appear (before Windows starts), insert the TrueCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the TrueCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. In the TrueCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Your Windows should start normally (provided that it is not encrypted).\n\nNote that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string>
<string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting, or when the operating system crashes due to a software error or hardware malfunction while encrypting, some data will very likely be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run TrueCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string>
<string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, TrueCrypt automatically waits until the data are written or read (see Status above) and then automatically continues encrypting or decrypting.</string>
<string lang="en" key="RESTART_AND_ENTER_DECOY_OS_PASSWORD">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to encrypt the currently running operating system, which will become the decoy operating system. Before you can do that, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the password for the decoy operating system.</string>
<string lang="en" key="OS_CLONING_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</string>
<string lang="en" key="OS_CLONING_NOT_FINISHED_CHOICE_RETRY">Restart the computer and proceed</string>
<string lang="en" key="OS_CLONING_NOT_FINISHED_CHOICE_TERMINATE">Permanently terminate the process of creation of the hidden operating system</string>
<string lang="en" key="OS_CLONING_NOT_FINISHED_CHOICE_ASK_LATER">Do nothing now and ask again later</string>
<string lang="en" key="DECOY_OS_INFO">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to encrypt the currently running operating system, which will become the decoy operating system.\n\nWhen ready, click Encrypt to start encrypting the currently running operating system.</string>
<string lang="en" key="RESCUE_DISK_HELP">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use TrueCrypt Rescue Disk (After Encrypting)\n-------------------------------------------------------------------------------------\n\nI. How to Boot TrueCrypt Rescue Disk\n\nTo boot a TrueCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. Note: In the TrueCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\nII. When and How to Use TrueCrypt Rescue Disk (After Encrypting)\n\n1) If the TrueCrypt Boot Loader screen does not appear after you start your computer (or if your Windows does not boot), the TrueCrypt Boot Loader may be damaged. The TrueCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore TrueCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n2) If you repeatedly enter the correct password but TrueCrypt says that the password is incorrect, the master key or other critical data may be damaged. The TrueCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n3) If the TrueCrypt Boot Loader is damaged or infected with malware, you can avoid running it by booting directly from the TrueCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n4) If Windows is damaged and cannot start, the TrueCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows.\n\nNote: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run TrueCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular TrueCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, as usual).\n\n\nNote that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string>
<string lang="en" key="OS_CLONING_PREINFO_TITLE">Operating System Cloning</string>
<string lang="en" key="OS_CLONING_PREINFO_HELP">In the next steps, TrueCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string>
<string lang="en" key="CONFIRM_CANCEL_HIDDEN_OS_CREATION">Do you want to cancel the entire process of creation of the hidden operating system?\n\nNote: You will NOT be able to resume the process if you cancel it now.</string>
<string lang="en" key="CONFIRM_CANCEL_SYS_ENC_PRETEST">Do you want to cancel the system encryption pretest?</string>
<string lang="en" key="BOOT_PRETEST_FAILED_RETRY">The TrueCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNote: If the TrueCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.</string>
<string lang="en" key="SYS_DRIVE_NOT_ENCRYPTED">The system partition/drive does not appear to be encrypted (neither partially nor fully).</string>
<string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string>
<string lang="en" key="SYS_ENCRYPTION_OR_DECRYPTION_IN_PROGRESS">Your system partition/drive is currently being encrypted, decrypted, or otherwise modified. Please interrupt the encryption/decryption/modification process (or wait until it is complete) before proceeding.</string>
<string lang="en" key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">An instance of the TrueCrypt Volume Creation Wizard is currently running on this system and performing or preparing encryption/decryption of the system partition/drive. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string>
<string lang="en" key="SYSTEM_ENCRYPTION_NOT_COMPLETED">The process of encryption or decryption of the system partition/drive has not been completed. Please wait until it is complete before proceeding.</string>
<string lang="en" key="ERR_ENCRYPTION_NOT_COMPLETED">Error: The process of encryption of the partition/drive has not been completed. It must be completed first.</string>
<string lang="en" key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, TrueCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main TrueCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</string>
<string lang="en" key="CANNOT_DECRYPT_HIDDEN_OS">TrueCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string>
<string lang="en" key="DEVICE_SELECTED_IN_NON_DEVICE_MODE">You have selected a partition or a device but the wizard mode you selected is suitable only for file containers.\n\nDo you want to change the wizard mode?</string>
<string lang="en" key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">Do you want to create a TrueCrypt file container instead?</string>
<string lang="en" key="CONFIRM_SYSTEM_ENCRYPTION_MODE">You have selected the system partition/drive, but the wizard mode you selected is suitable only for non-system drives.\n\nDo you want to set up pre-boot authentication (which means that you will need to enter your password each time before Windows boots/starts) and encrypt the system partition/drive?</string>
<string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE">Are you sure you want to permanently decrypt the system partition/drive?</string>
<string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the system partition/drive, unencrypted data will be written to it.\n\nAre you really sure you want to permanently decrypt the system partition/drive?</string>
<string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The TrueCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the TrueCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the TrueCrypt Rescue Disk to boot or to repair the TrueCrypt Boot Loader.\n\n2) Due to increased memory requirements, on some computers, it is impossible to encrypt the system partition/drive.\n\n3) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string>
<string lang="en" key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">If you encounter any of the previously described problems, decrypt the partition/drive (if it is encrypted) and then try encrypting it again using a non-cascade encryption algorithm (e.g. AES).</string>
<string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update TrueCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the TrueCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded TrueCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a TrueCrypt driver and TrueCrypt applications whose version numbers are different from the version number of the TrueCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue? (Not recommended.)</string>
<string lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the TrueCrypt Boot Loader that booted this operating system is different from the version number of the TrueCrypt driver (and of the TrueCrypt applications) installed on this system.\n\nYou should run the TrueCrypt installer (whose version number is the same as the one of the TrueCrypt Boot Loader) to update TrueCrypt on this operating system.</string>
<string lang="en" key="BOOT_LOADER_UPGRADE_OK">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</string>
<string lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</string>
<string lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the TrueCrypt Boot Loader.</string>
<string lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">TrueCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Note that this is not a bug in TrueCrypt.</string>
<string lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that TrueCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, TrueCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in TrueCrypt.</string>
<string lang="en" key="SKIP_HIDDEN_SECTOR_DETECTION">Skip detection of hidden sectors (use the size reported by the operating system)</string>
<string lang="en" key="RETRY_HIDDEN_SECTOR_DETECTION">Try to detect hidden sectors again</string>
